Potenciómetros

  1. CTS
    Potenciómetro 500k Push Pull

    Supplied complete with 1 x nut, 1 x washer and 1 x lock washer, this 500k audio taper (log) pot is CTS's own push/pull pot allowing for various additional wiring possibilities such as coil-tapping or phase switching. 24 spine split shaft for USA-Fender or Gibson knobs to push-fit straight on (or any of our own push-fit knobs that are labelled as 24 spline). 500k value is typically used in conjunction with Humbucker pickups.

    Checking the thread length: this particular pot has a 9.5mm thread length and will fit most instruments such as Gibson SG or any guitar that has the controls mounted through a pickguard (scratchplate). However, a lot of the standard production USA Gibson Les Paul guitars (non-Historic) have thick maple tops, meaning that this pot will not be long enough. Instead, the long-shaft 19mm version is recommended with part code CTS-A500-PPL.

    10% Tolerance
    Brass shafts
    Audio Taper (Logarithmic)

    Mais informação
    12,90 €

    Em Stock

  2. CTS
    Potenciómetro 250k Push Pull

    Supplied complete with 1 x nut, 1 x washer and 1 x lock washer, this 250k audio taper (log) pot is CTS's own push/pull pot allowing for various additional wiring possibilities such as coil-tapping or phase switching. 24 spine split shaft for USA-Fender or Gibson knobs to push-fit straight on (or any of our own push-fit knobs that are labelled as 24 spline). 250k value is typically used in conjunction with single coil pickups - we also sell the same pot in a 500k value which is ideal for use with Humbucker pickups.

    10% Tolerance
    Brass shafts
    Audio Taper (Logarithmic)

    Mais informação
    12,90 €

    Em Stock

  3. CTS
    Potenciómetro 500k Push Pull XL

    Supplied complete with 1 x nut, 1 x washer and 1 x lock washer, this 500k audio taper (log) pot is CTS's own push/pull pot allowing for various additional wiring possibilities such as coil-tapping or phase switching. 24 spine split shaft for USA-Fender or Gibson knobs to push-fit straight on (or any of our own push-fit knobs that are labelled as 24 spline). 500k value is typically used in conjunction with Humbucker pickups.

    Checking the thread length: this particular pot has an extra-long 19mm thread length and will fit most standard production USA Gibson Les Paul guitars (non-Historic) that have thick maple tops. Instruments such as Gibson SG or any guitar that has the controls mounted through a pickguard (scratchplate) can use the regular 9mm length version, part code CTS-A500-PP.

    10% Tolerance
    Brass shafts
    Audio Taper (Logarithmic)

    Mais informação
    12,90 €

    Em Stock

  4. CTS
    Potenciómetro 275K Custom Audio Taper Split Shaft

    These are NOT the same CTS pots that other companies stock and sell. These are developed using 9% +/- tolerances and a value at 10% over the standard 250K rating (275K). This ensures you not only optimum performance but guarantees your potentiometers will always be at least the value stated unlike many others using 20% tolerances where you can be over spec but in most cases way under the specifications you need to ensure good tone from your pickups. We added brass components and a high quality wiper versus what comes standard on most run of the mill pots to ensure long life, quality and consistent performance. Mais informação
    8,85 €

    Em Stock

  5. CTS
    Potenciómetro 275K Custom Audio Taper Solid Shaft

    These are developed using 9% +/- tolerances and a value at 10% over the standard 250K rating (275K). This ensures you not only optimum performance but guarantees your potentiometers will always be at least the value stated unlike many others using 20% tolerances where you can be over spec but in most cases way under the specifications you need to ensure good tone from your pickups. We added brass components and a high quality wiper versus what comes standard on most run of the mill pots to ensure long life, quality and consistent performance. Mais informação
    8,85 €

    Em Stock

  6. CTS
    Potenciómetro 550K Custom Audio Taper Split Shaft

    These are developed using 9% +/- tolerances and a value at 10% over the standard 500K rating (550K). This ensures you not only optimum performance but guarantees your potentiometers will always be at least the value stated unlike many others using 20% tolerances where you can be over spec but in most cases way under the specifications you need to ensure good tone from your pickups. We added brass components and a high quality wiper versus what comes standard on most run of the mill pots to ensure long life, quality and consistent performance. Mais informação
    9,25 €

    Em Stock

  7. WD Music
    Potenciómetro 500k Push Pull 3/8in.

    500k ohm pot with push/pull actuator switch used for humbucking pickups. Provides capability for such applications as coil tapping, splitting, and phasing. Mais informação
    8,65 €

    Em Stock

  8. WD Music
    Potenciómetro 250k Push Pull 3/8in.

    250k ohm pot with push/pull actuator switch used for single coil pickups. Provides capability for such applications as coil tapping, splitting, and phasing. Mais informação
    8,65 €

    Em Stock

  9. WD Music
    Potenciómetro 500k Push Pull 3/4in.

    This 500k ohm pot with push/pull actuator switch is typically used for humbucking pickups. Provides capability for such applications as coil tapping, splitting, and phasing. The combination potentiometer / switch allows this to be installed in existing potentiometer locations or added in to the existing wiring harness. Mais informação
    9,50 €

    Em Stock

  10. Fender
    Pure Vintage 1 Meg Audio Taper Control

    Fender offers a wide selection of Pure Vintage electronics to players looking to restore or upgrade their guitar or amplifier with classic Fender in mind. From potentiometers to select capacitors, tube sockets and more, these electronics are created to closely replicate original-era Fender parts and have been used on a number of Fender reissue instruments and amplifiers, including our American Vintage series of guitars and basses. 

    But best of all, Pure Vintage guitar and amp electronics are also versatile enough to fit most Fender guitars and tube amplifiers, making it easier than ever to inject that vintage vibe into any setup.

    Mais informação
    6,50 €

    Em Stock