Two Notes
Revolt Bass

Center stage on ReVolt Bass are a trio of tonally-district channels inspired by an Ampeg® SVT '76, a Marshall® 1992 JMP Super Bass Mark II, plus a custom proprietary high gain Bass amp, specified for the exacting needs of the modern bass player.


CHANNEL 1
CLASSIC CLEAN is - put simply - iconic, delivering the thump, full-frequency response and power synonymous with channel 1 on the legendary Ampeg® SVT '76. A titanic tone guaranteed, oozing with rafter-rattling low end, punchy mids and buttery smooth highs.


CHANNEL 2
VINTAGE DIRT is your weapon of choice in moments where you just need to cut above the rest. Taking inspiration from a Marshall® 1992 JMP Super Bass Mark II, this is the epitome of a larger-than-life bass tone topped with lashings of vintage dirt.



CHANNEL 3
MODERN DRIVE delivers ultimate flexibility for the forward thinking player. Based on an original Two notes design, it’s super-tight with an abundance of gain for a thick “gained-to-the-max” tone. For added tonal versatility, there’s a switchable Dry/Wet Blend that delivers precision and clarity when you need it.

SPECIFICATIONS

Input / Output
Input:
Jack 6.35 mm (1/4”) unbalanced (TS, Tip/Sleeve)
Impedance : 1 MOhms

Send:
Jack 6.35mm(1/4“) unbalanced (TS)
Max output level : +11dBu
Impedance : 300 Ohms

Return:
Jack 6.35mm(1/4“) unbalanced (TS)
Max input level : +11dBu
Impedance : 1 MOhms
Unbuffered, directly connected to Output when active

Output:
Jack 6.35 mm (1/4”) unbalanced (TS)
Max output level : +11 dBu
Impedance : 300 Ohms

DI Output:
XLR, balanced
Impedance : 600 Ohms balanced, 300 Ohms unbalanced
Max output level : +11dBu
Protected against +48V phantom power

MIDI:
MIDI In & Out / Thru
TRS Jack Type-A
Din-5 Pin converter cables included

Phones:
Jack 3.5 mm (1/8“) stereo (TRS, Tip/Ring/Sleeve)
Impedance : 39 Ohms

Aux In:
Jack 3.5 mm (1/8“) stereo (TRS, Tip/Ring/Sleeve)
Impedance : 10 kOhms

Preamp
Tube:
PSVANE ECC83

Power
Mains power adaptor:
DC Jack 2.1mm, negative center

Input voltage:
12V DC

Power consumption:
Approx. 6W

Current draw:
600mA

Dimensions & weight
Width x Depth x Height*:
19.2cm x 11.7cm x 7cm – 7.6″ x 4.6″ x 2.8″
*Including connectors and knobs

Weight:
845 g / 1.86 lbs